This addendum or supplemental/bid bulletin is issued to modify or amend items in the Bid Documents. This shall form an integral part of the bid documents of item under Package 1-Supply and Delivery of One (1) unit Brand New 220 KVA (176KW) Generator Set with Soundproof Canopy including installation of Automatic Transfer Switch (ATS), Built-in Motor Accessories and Installation of Electrical Wiring.
Amendment # 3 – Revisions/ Addendum under Section VII (Technical Specifications)
ITEM
No. |
ORIGINAL SPECIFICATION |
AMENDED SPECIFICATION
|
1 |
SUPPLY, DELIVERY AND INSTALLATION OF:
1 unit – Brand new 220 KVA (176 KW) Generator set with soundproof canopy, main transfer switch Automatic Transfer Switch (ATS), built in motor accessories including all necessary labor and materials for its installation, electrical wiring and operation. |
SUPPLY, DELIVERY AND INSTALLATION OF:
1 unit – Brand new 220 KVA (176 KW) Generator set with soundproof canopy, Automatic Transfer Switch (ATS), built in motor accessories including all necessary labor and materials for its installation, electrical wiring and operation. |
I Specification (Technical Data) |
- Specification (Technical Data)
|
Mode of operation : Full Resilient |
Deleted |
- Alternator
|
II. Alternator |
No. of Leads – 12 wires – option for multi voltage function for feature use to operating Voltage Adoptable |
Deleted |
Rotor : Rotating Field Type |
Deleted |
Exciting System: rushless, self exciting |
brushless, self-exciting |
: Self Regulating |
: Self-regulating |
Auto-Voltage Regulator: /-1.5 steady state voltage regulation |
Auto-Voltage Regulator: /+,-1.5-2.0 steady state voltage regulation |
ADDITIONAL FEATURES OF ALTERNATOR |
ADDITIONAL FEATURES OF ALTERNATOR |
- Alternator can cope-up with 300% overload for 20 seconds.
|
1. Alternator can cope-up with 300% overload for 10 seconds. |
2. 2/3 pitch winding to eliminate 3rd harmonics and neutral current |
Deleted |
- Engine
|
III. Engine |
Engine Hp : 250 HP |
Engine Hp : 225 hp – 275 hp |
Model : 6CTA 8.3G |
Deleted |
|
Exhausting Pipe: Flapper should be15 ft. above ground level (additional exhaust pipe will be installed upon delivery) |
Speed governing: Mechanical |
Speed governing: Electronic Governor |
ADDITIONAL CONTROLS AND LAMPS |
Deleted |
- Fuel pre-filter with waste separator – protect the fuel injection system against solid and liquid impurities.
|
Deleted |
- Dry-type air filter including maintenance indicator
|
Deleted |
3. Cooling air temp. at radiator 60C |
Deleted |
- ENGINE CONTROL AND LAMPS
|
IV. INTELLIGENT GENSET CONTROLLER AND LAMPS TO MONITOR CONTROL PROCEDURES, PROTECTION PARAMETERS, MEASURING TELECOMUNICATIONS W/ LED DISPLAY |
- Diagnose request switch
|
Deleted |
- Frequency adjust potentiometer
|
Deleted |
- Fuse
|
Deleted |
- Electrical system indicator
|
Deleted |
- Over speed shutdown indicator
|
Deleted |
- Alternator charging indicator
|
Deleted |
7. AC shutdown indicator |
Deleted |
8. Stop engine light |
Deleted |
9. Fuel level indicator |
Deleted |
10. Supply voltage adjust potentiometer |
Deleted |
- MAIN CIRCUIT BREAKER
|
V. Deleted |
- EMERGENCY STOP BUTTON
|
VI. Deleted |
- BASEFRAME
|
VII. Deleted |
Compact skid mounted pack |
Deleted |
Easy to install in a confined space |
Deleted |
Easy to transport by means of forklift slots |
Deleted |
- STEEL CANOPY
|
VIII. Deleted |
Rigid construction – with stand rough on site handling |
Deleted |
Weatherproofed for use in worst environment conditions |
Deleted |
Noise reducing foam plastic liner – allows operation in noise restricted areas and night |
Deleted |
- OTHERS: CONSUMPTION (ACC TO ISO 3046-A)
|
IX. OTHERS: CONSUMPTION (ACC TO ISO 3046-A) |
Fuel tank Capacity : 352 L |
Deleted |
Fuel Consumption at 100% load: 44 L/H |
Deleted |
Emission Compliance : EPA |
Deleted |
Sound Level at 75% lead, 7m distance 69.5 db |
Deleted |
ENCLOSURE SPECIFICATION: |
Deleted |
- 100% Galvanize materials, guaranteed to be rust free for five (5) years
|
Deleted |
- Fully blotted construction with dead front cover hinged type
|
Deleted |
- Phospetized metal parts, powdered painted to a minimum thickness of 80 microns
|
Deleted |
4. Copper bus bars are oxygen free, high conductivity. |
Deleted |
OTHER REQUIREMENTS: |
OTHER REQUIREMENTS: ISO Certified |
Certifications –Generator sets are designed, manufactured, tested, and certified to relevant UL, NFPA, ISO, IEC, and CSA standards |
Deleted |
For guidance and information of all concerned.